HFC 6110

HFFR Polyolefin Sheathing Compound for Wire & Cable

These compounds are engineered to enhance flame retardant property with MDH based on polyolefin for sheath of power cable. It doesn’t emit toxic gases as well as halogen components and show excellent low smoke property. Also, it is designed to show well-balanced properties of flame retardant property, mechanical property and processing property etc.

APPLICATION

IEC 60502 ST8

Power cable sheath & Insulation

Optical fiber cable sheath

BS 7655:6.1 types LTS1 & LTS3 & LTS4

PROPERTY

PROPERTY
Item Test method Unit HFC 6110
Density ASTM D792 g/cc 1.25
Melt Flow Index ASTM D1238 (190℃/20kg) g/10min 40
Hardness ASTM D2240 Shore D 48
Tensile Strength IEC 60811-1-1 Mpa 12.5
Elongation at Break IEC 60811-1-1 % 500
Tensile Strength After Aging IEC 60811-1-2 (100℃/168hrs) % 90
Elongation After aging IEC 60811-1-2 (100℃/168hrs) % 85
Oil Resistance T.S Retention IEC 60811-2-1 (IRM902/70℃,4hrs) % 90
Oil Resistance Elongation Retention IEC 60811-2-1 (IRM902/70℃,4hrs) % 95
Oxygen Index ASTM D2863 % 32
Hot Pressure Testat 80℃ IEC 60811-3-1 % 10
Hot Pressure Testat 90℃ IEC 60811-3-1 % 20
Water Absorption IEC 60811 mg/cm² 0.1
Emission of Halogenidric acids IEC 60754-1 % <0.1
pH IEC 60754-2 - 5.2
conductivity IEC 60754-2 ㎲/mm 2.5
Volume Resistivity 20℃ ASTM D257 Ω∙cm 1x1015
Smoke Density ASTM E662 Flaming mode dm 80
Non-Flaming mode 160
Tear Strength ASTM D624 N/mm 33
Temperature Index ISO 4589-3 : 1996 290
Cold Impact KS M 6676 : 2008 -40

PROCESSING

It is recommended that this product can be extruded on any conventional extruder equipped with a PE/PVC, 3 stage or barrier type screw having an L/D ratio of 20~24 : 1 and a compression ratio of 1.8~3 : 1

Prior to processing, we recommend that this product is dried at 70~80 。 C during 3 hours to remove moisture.

PROCESSING
C1 C2 C3 C4 C5 Neck Head Die
150 155 160 165 165 170 175 175

STORAGE & HANDLING

Should be stored at room temperature between 10~30。C.

Maximum storage period in dry and clean place is 6 months unopened and in original packaging.

If it has been stored in an opened condition for a long time, use it after drying for 3~4 hrs at 70~80℃. in a dehumidifying dryer.

To ensure health and safety, Material Safety Data Sheets (MSDS) are available on request

PACKING

600kg Reinforced Carton Box with inner aluminum liner.

25kg Paper bag with inner aluminum liner.

CUSTOMIZE

Special compounds can be developed to meet customers specification and requirements.

Anti-rodent

Anti-rodent

Anti-termite

Anti-termite

UV Resistance

UV Resistance

Color

Color